Twiflex T40 Hydraulic Brake Caliper

The Twiflex T40 disc brake caliper is split caliper design suitable for use with a minimum disc thickness of 20mm. The modules are mounted each side of a central mounting plate of the same thickness as the brake disc. Minimum disc diameter is 300mm.

Normally one or two calipers are used per disc, but the number may be increased depending on disc size. The brakes may be positioned at any angle around the periphery of the disc. A range of brake discs is available from Twiflex.

The ratings shown on the graph are based on fully bedded in and conditioned brake pads with a nominal friction coefficient.

Twiflex T40 Hydraulic Brake Caliper


  • Pad Assembly (asbestos free) (2 required per caliper)
    Part No. 7080142
  • Spare Seal Kit (Mineral Oil) Part No. 6000360

Kits comprise of two piston seals and two O-rings

Please refer to data sheets for more information.

Download PDF data sheets

Buy your industrial brakes and spares direct from our warehouse, or talk to one of our experienced engineers today to discuss your requirements.  +44 (0) 1453 750814