Twiflex T2 Air/Hydraulic Brake Caliper

The Twiflex T2 disc brake caliper is split caliper design suitable for use with a minimum disc thickness of 5mm. The modules are mounted each side of a central mounting plate of the same thickness as the brake disc. Minimum disc diameter is 120mm. Alternatively, the brake may be side-mounted with a spacer equal to the disc thickness between the two halves.

For pneumatic operation, use dry and filtered compressed air. Pneumatic brakes require a control valve, operated either manually or by pneumatic or electrical signal.

Normally one or two calipers are used per disc, but the number may be increased depending on disc size. The brakes may be positioned at any angle around the periphery of the disc, but should ideally be mounted horizontally (i.e. at the 3 o’clock or 9 o’clock position). A range of brake discs is available from Twiflex (see Disc and Hub Assemblies).

The ratings shown on the graph are based on fully bedded in and conditioned brake pads with a nominal friction coefficient μ = 0.4. Twiflex disc brakes must be used with Twiflex asbestos free brake pads.

Effective disc radius = actual radius (m) – 0.019m.

Twiflex T2 Series Disc Brake Caliper

AVAILABLE SPARES

  • Friction Pad Kit Part No. 7080168
  • Spare Seal Kit (Mineral Oil) Part No. 6000352
  • Spare Seal Kit (Vegetable Oil) Part No. 6000353

Kits comprise of two piston seals and two O-rings

Please refer to data sheets for more information.

Download PDF data sheets

Buy your industrial brakes and spares direct from our warehouse, or talk to one of our experienced engineers today to discuss your requirements.  +44 (0) 1453 750814     sales@howdon.co.uk

Menu